Guide
to Supported Platforms
This document
contains information on the CSPI-supported platforms. The information is
broken down into the following categories:
Please select the appropriate category:
SuperKit
Release Guide
SK
4.60
| Platform |
Host
OS |
Models |
Restrictions |
| SPARC-VME |
Solaris
1 |
Force-2CE |
Cannot
use cs0. |
| Force-CPU10 |
N/A |
| Sun-4 |
Sun-4/280
requires rev. 25 or higher CPU board. |
| Force-5V |
Requires
DOP and Solaris 1.1.2.
Limit of 7 or 11 SC2/SC3s. |
Force-3CE
Force-5CE |
Requires
DOP.
Limit of one 192MB shared memory window (i.e. one SC4, only).
Cannot use cs0 |
| Themis-10MP |
Requires
DOP. |
| Solaris
2 |
Force-CPU10 |
N/A |
| Force-5V |
Requires
DOP. Solaris 2.4 only. Limit of 1 GB shared memory window. |
| Force-2CE |
Requires
DOP. Cannot use CS0. |
Force-3CE
Force-5CE |
Requires
DOP. Limit of one 192 MB shared memory window (i.e. one SC4, only).
Cannot use CS0 |
| Themis-10MP |
Requires
DOP. |
Sun-4
Sun-4/600 |
Sun-4/280
requires rev. 25 or higher CPU board. |
| SPARC-Sbus
PTI Sbus-to-VME adapter |
Solaris
1 |
Sparcstation
5, 10, 20 |
Requires
DOP. Uses PTI standard VME address PAL. Limit of one 192 MB shared
memory window (1 SC4). |
| Solaris
2 with PTI driver |
Sparcstation
5, 10, 20 |
SuperKit
Release Guide
Development
Tools
| Tool |
Platform |
Version |
Restrictions |
| Metaware
C/C++ Compiler |
Sparc
cross (big endian)
Solaris 1 & 2 |
2.6b |
Cannot
use Solaris 2.1, sim860 not available for Solaris 2. |
| Debugger |
Solaris
1 & 2 |
1.03 |
SK
4.31 or higher. Not available for VxWorks. |
| Profiler |
Solaris
1 & 2 |
1.02 |
SK
4.31 or higher. |
| APT |
Solaris
1 |
4.1.95 |
SK
4.40 of higher. |
| Dataflo
(Uni) |
Solaris
1 & 2 |
1.2 |
N/A |
| Dataflo
(Multi) |
Solaris
1 & 2 |
1.2 |
N/A |
| Dataflo
(Unioptimized) |
Solaris
1 & 2 |
1.2 |
N/A |
SuperKit
Release Guide
Libraries
| Library |
Version |
Restrictions |
| ISSPL
(big endian) |
4.20 |
SK
4.30 or higher. |
| IPL |
1.12 |
SK
4.31 or higher. |
| QTC |
1.0 |
N/A |
| SSL |
N/A |
N/A |
| Toolkit |
2.2 |
SK
4.30 or higher.
ISSPL 4.10 or higher. |
SuperKit
Release Guide
Other
Products
| Product |
Comments |
| 2XL |
SK
3.02 or higher |
| 3XL |
SK
4.01 or higher |
| 4XL |
SK
4.20.01 or higher |
| Diagnostics |
Comments |
| RPC |
SK
2.21 or higher |
| SSE |
SK
3.02 or higher |
| VSB |
SK
2.21 or higher |
| P100 |
SK
4.40 or higher |
VME/VSB
interrupt handling |
SK
4.40 or higher;
patch available for 4.31 |
SuperKit
Release Guide
SK
4.40
| Platform |
Host
OS |
Models |
Restrictions |
| SPARC-VME |
Solaris
1
(SunOS 4.1.3) |
Force-5V |
Requires
driver patch. Solaris 1.1.2 only. Limit of 7 or 8 SC2s or SC3s |
| Force-2CE |
Cannot
use cs0. |
Force-3CE
Force-5CE |
Requires
special driver.
Limit of one 192MB shared memory window (i.e. one SC4, only). Cannot
use cs0 |
| Themis-10MP |
Requires
special driver. |
| Sun-4 |
Sun-4/280
requires rev. 25 or higher CPU board. |
| Solaris
2 |
Force-CPU10 |
N/A |
| Force-2CE |
Requires
special driver. |
Force-3CE
Force-5CE |
Requires
special driver. Limit of one 192 MB shared memory window (i.e. one
SC-4, only). Cannot use CS0 |
| Themis-10MP |
Requires
special driver. |
| Sun-4 |
Sun-4/280
requires rev. 25 or higher CPU board. |
| SPARC-Sbus
PTI Sbus-to-VME adapter |
Solaris
1
with PTI driver |
Sparcstation
5, 10, 20 |
Requires
special driver. Uses standard address PAL. Limit of one 192 MB shared
memory window (1 SC4). |
| Solaris
2 with PTI driver |
Sparcstation
5, 10, 20 |
Contacting
Customer Support
If there are
any problems installing or using this software, or if any bugs or possible
enhancements are noticed, contact the CSPI Customer Support Department.
- tel:
1-800-325-3110 ext. 1309
- tel:
978-663-7598 ext. 1309
- fax:
978-663-0150
- e-mail:
support@cspi.com
Although
the information contained herein is believed to be accurate and up-to-date,
CSPI assumes no responsibility for inaccuracies or omissions.
|